China High quality 8 Minutes Rapid Carbon Black Epoxy Adhesive Quotes, Factory, Purchasing, Manufacturers
Home > Products > Epoxy Glue > 8 Minutes Rapid Carbon Black Epoxy Adhesive

8 Minutes Rapid Carbon Black Epoxy Adhesive

Brand : MAGPOW

Product origin : China

Delivery time : 25-35 DAYS

Supply capacity : 100 TON/MONTH

Article Number: MPA108

Specification: 30g/set,12sets/inner,12inners/ctn

Meas: 43.5*32.5*44.5cm

 

Feature:

8 Minutes Rapid Carbon Black Epoxy Adhesive have the features of: (1) solidifying rapidly within 3-5 minutes, (2) suitable for small parts and structural strength (3) can be used after two hours (4) quick set and high adhesive performance (5) waterproof and chemical medium (6) can be lacquered and waxed

 

Main Component:

A component is the modified Epoxy Resin and mucus, B component is modified amine solidify and mucus.

 

Technical Feature:

Name Of Product

Item Code

Component Rate(A:B=1:1)

Appearance

Solidifying Speed(25℃,mix glue 5-10g)

Shear Strength (25℃×48h,Steel-Steel)

8 Minutes Rapid Carbon Black Epoxy Adhesive

SK-1121

A:B=1-1.2:1

Component A is white mucus and B is black mucus

5-10 Mins

≥5MPa

 

Scope Of Application:

The 8 Minutes Rapid Carbon Black Epoxy Adhesive of this series are widely used for bonding iron, casting iron, steel, aluminum, glass, pottery, graphite, concrete etc. Mainly used in the joint, the seal and patching of architecture material, the automobile spare part, the electronic component assembly, the gem jade carving, the handicraft and so on.







Using Method:  

1. The surface should be clean and dry, without oil or wax

2. Take down the cap, pierce the seal, squeeze out evenly (A:B=1:1). cover the surface with glue based on the mixing of the two components evenly,

3. Press it according to the actual condition.. it could achieve the using intensity after the solidifying for three hours during the normal temperature, it is suggested to operate at above 10℃.


Warning:      

1. Wash the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying.

2. 8 Minutes Rapid Carbon Black Epoxy Adhesive must be even for the mixing of the two components during the adjusting of the glue. Quantity should not excess too much.

3. Take strict precautions against touching by the kids and entering into the mouth.

4. Avoid touching with the eyes and skin directly.  If getting touch with the skin, please wash them at once by using of a cloth with dipping of alcohol before solidifying, then, clean them by soap and warm water. If getting touch with the eyes, please wash them immediately with plenty of water, and see the doctor for serious situation.

5. Tighten the caps after usage .Do not mix the cap of part A and B.

 

Storage And Packing:

1. Stock the products with air-tight seal in the environment of shade and dry.  The shelf life is one year.  It is available to use based on passing of the test if being beyond the shelf life.  

2. Preserve and transport as non dangerous products.

 

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone:

  • *Message :
    Message