China High quality 30 Minutes Rapid Black & White Epoxy Adhesive Quotes, Factory, Purchasing, Manufacturers
Home > Products > Epoxy Glue > 30 Minutes Rapid Black & White Epoxy Adhesive

30 Minutes Rapid Black & White Epoxy Adhesive

Brand : MAGPOW

Product origin : China

Delivery time : 25-35 DAYS

Supply capacity : 100 TON/MONTH

Article Number: MPA105

Specification: 30g/set,12sets/inner,12inners/ctn

Meas: 43.5*32.5*44.5cm

 

Feature:

30 Minutes Rapid Black & White Epoxy Adhesive is based on the room temperature, having the features of (1) solidifying within 30 minutes, (2) especially suitable for joint of large area or multiple parts  (3) can be used after 16 hours (4) quick set and high adhesive performance (5)waterproof and chemical resistant (6) can be lacquered and waxed.


Main Component:

A component is the modified Epoxy Resin, B component is modified amine solidify.

 

Technical Feature:

Name Of Product

Item Code

Component Rate(A:B=1:1)

Appearance

Solidifying Speed

(25℃,3-5g)

Shear Strength (25℃×48h,

Steel-Steel)

30 Minutes Rapid Black & White Epoxy Adhesive

SK-113

A:B=1:1

A component is the cream color to the pessimistic thick liquid, the B component is the cinereus to the black thick liquid

20-25 Mins

≥10MPa

 

Scope Of Application:

The products of this series are widely used for bonding all kinds of hard material, like iron, casting iron, steel, aluminum, glass, pottery, graphite, concrete etc. And they could be applied to bond and repair in the field of daily households, home appliance, machine implement for agriculture, machine facilities, apparatus, stationary tools, arts, furniture, tube of water, valves, chemical piping, water towers, dam, pipes of water power plant etc.







Using Method:  

1.The surface should be clean and dry, without oil or wax

2. Take down the cap, pierce the seal, squeeze out evenly (A:B=1:1). cover the surface with glue based on the mixing of the two components evenly

3. Press it according to the actual condition.. it could achieve the using intensity after the solidifying for 3 hours during the normal temperature, it is suggested to operate at above 10℃.

 

Warning     

1. It must be even for the mixing of the two components during the adjusting of the glue. Quantity should not excess too much.

2. Avoid touching with the eyes and skin directly.  If getting touch with the skin, please wash them at once by using of a cloth with dipping of alcohol before solidifying, then, clean them by soap and warm water. If getting touch with the eyes, please wash them immediately with plenty of water, and see the doctor for serious situation.

3. Take strict precautions against touching by the kids and entering into the mouth.

4. Tighten the caps after usage .Do not mix the cap of part A and B.

5. Wash the additional glue on the hands or the surfaces of bonding materials by alcohol before its solidifying.

 

Storage And Packing:

1. Stock the products with air-tight seal in the environment of shade and dry.  The shelf life is one year.  It is available to use based on passing of the test if being beyond the shelf life.  

2. Preserve and transport as non dangerous products.


 

Please feel free to give your inquiry in the form below. We will reply you in 24 hours.
* Subject :
* Email :
  • Name :

  • Phone:

  • *Message :
    Message